7 Most Common Jacuzzi Problems and Repairs

Whether you’re an experienced Jacuzzi owner or just getting started, there are a few common Jacuzzi problems and repairs that you’re likely to face. The good news is that most of them can be fixed with little to no expense. Here are some common Jacuzzi problems and repairs to watch for from the hot tub installation experts at Ajax Pool & Spa.

Water isn’t Heating Up

Using a hot tub can be a great way to relax during cold winter months. But if you’re not getting the water temperature you expect, you may have an issue. If the heater isn’t working, there are several things to try.

One of the most obvious problems is a clogged filter. A clean filter will help prevent floating objects from entering your hot tub. Another common problem is an air lock. This occurs when air gets trapped in the plumbing lines. Fortunately, an air lock can be fixed by a professional.

You should also check your pump and filter. If you have an older hot tub, the pump may be malfunctioning. You can also try adding a filter to help keep floating objects out of the pump.

You may also have problems with the jets. Jets can malfunction or be clogged, preventing the water from flowing properly. Another common problem is a broken filter. To ensure the heater is working, it’s important to check the water temperature, which may be insufficient to meet the heating requirements.

You should also test the thermostat. Some newer spas use a solid-state thermostat, attached to a circuit board. If you’re unsure about the thermostat, ask a knowledgeable technician.

Pump isn’t Working Properly

Having a pump that isn’t working properly can be a hassle. The first step is to determine if the pump is broken or if it’s simply due to wear and tear.

If the pump is broken, you may be able to fix it yourself. Depending on the type of pump, you may need to replace a few small parts, but it’s usually do-able.

If you’re having trouble with the pump, you may have a clog or debris. You may also need to add a larger pump. A bigger pump will help you with adding more water to your home, but you’ll need to make sure that the discharge hose is not too short. The longer the hose, the more work the pump has to do.

You’ll also want to ensure that there’s no water in the discharge area of the pump. This will help to reduce the temperature of the pump.

If you’re having trouble with your pump, you may hear a whining sound. It’s normal for pumps to make this noise, but if you’re hearing a lot of it, or if it sounds a lot louder, it’s a sign that the pump isn’t working properly.

Water isn’t as Warm as You Set it at

Using the right hot tub cover can increase the overall temperature of the water, as well as improve the overall spa experience. The trick is to maintain this aforementioned temperature in the long run, preferably with the help of a spa service provider or two. The best way to achieve this is to set a timer, a.m. based on how many minutes you are currently in the tub and when you are going to be leaving for the day. This will help reduce the overall time spent in the tub, and the number of spa service calls that will be made in the long run.

GFCI Breaker Trip

GFCI breakers are designed to protect people from electrical shocks around water. When they detect an imbalance in current, they interrupt the circuit and shut off power to your hot tub. They are required for many spas.

One of the most common causes of GFCI breaker trip in Jacuzzis is a faulty heater element. These components oxidize when exposed to moisture. They should be replaced.

Another cause of GFCI tripping in Jacuzzis is a problem with the breaker box. Water leaks onto the breaker box, motor, or the electrical contacts can cause the breaker to trip. If this is the case, the breaker will need to be replaced.

GFCIs are also susceptible to wear and tear. The GFCI will trip if it detects an imbalance in the current between the hot and neutral wires in the same power circuit. This imbalance can be caused by lightning strikes to the breaker box or by constant power surges.

If the GFCI is tripping frequently, it may be time for a new breaker. This can be done by a licensed electrician. If the breaker is not tripping, you may need to replace the receptacle that the breaker is connected to.

Humming or Hammering Sounds Coming Out of the Tub

Seeing humming or hammering sounds coming out of your tub or toilet is an alarming sign of trouble in the plumbing system. The best way to diagnose the cause of these sounds is to have a professional plumber take a look at the problem.

Humming or hammering sounds coming out the tub or toilet can be caused by a number of factors. The most obvious culprit is water pressure. If you notice that the humming or hammering sounds are coming from the toilet, you need to consider whether or not the toilet valve is working. If it isn’t, your toilet may be stuck, or the water level may be too high. If this is the case, you need to get the valve replaced.

Other possible causes of humming or hammering sounds include blocked or damaged pipes. It’s important to get your plumbing system checked out as soon as possible so that you can solve the problem before it becomes worse.

The most important thing to do is to stop the humming or hammering noises right away. If you do not have access to a professional plumber, you may have to perform the necessary DIY fixes to solve the problem.

Mildew in the Water

Whether you are a new Jacuzzi owner or you have been soaking in your tub for years, you will need to keep your hot tub clean and sanitized. This will prevent any unwanted algae or bacteria from growing. Keeping your hot tub clean will also prevent any mildew from forming. To keep your hot tub in tip top condition, it is best to check your water quality on a regular basis.

Checking your spa water’s pH and alkalinity levels is a great way to make sure you get the best possible experience from your hot tub. The alkalinity of your water should be maintained at a level that is neither too high nor too low. The best way to achieve this is by using test strips. Using these strips will ensure you get the proper amount of chlorine or bromine in your water.

The proper pH levels should be checked on a daily basis. Checking for the proper level of alkalinity will help you prevent mildew and other problems. If you are experiencing a problem with mildew in the water of your Jacuzzi, there are a number of treatments available. You can try using hot tub chemicals such as Jacuzzi Spa Shock Oxidizer.

Cloudy Water

Getting cloudy water in your hot tub is not something you want to have to deal with. Cloudy hot tub water is a problem that can derail your plans for a relaxing spa experience. To clear cloudy hot tub water, you will need to clean the water and adjust the chemical balance.

Cloudy hot tub water can be caused by many different factors. Some of the most common are a clogged filter, old water, and high levels of dissolved solids. In addition, you can also have algae grow in your hot tub.

The first step to resolving cloudy hot tub water is to test the water. Depending on the chemical level, you may need to add a sanitizer or shock treatment. Before adding sanitizers, you should check the pH and alkalinity levels to make sure they are in balance.

A dirty filter can contribute to cloudy water. To avoid this, you should clean the filter once a month. A hose filter can also help to clear the water. You should also replace the filter when it becomes clogged.

Cloudy hot tub water can also be caused by metals in the water. These can stain the shell of the spa, and they can also alter the chemistry of the water.